There are a bunch of little loops that hold the cover on, and some of the hooks are small and in hard to reach areas. This is probably the graco extend to fit most disappointing aspect of this seat. When you have babies and young toddlers, having an easy to clean seat cover is a huge time saver.
Do not put snowsuits or bulky garments on your child when placing them in the car seat. Bulky clothing can prevent the harness straps from being tightened properly. To keep child warm, buckle your child in the car seat and place a blanket around the child or place the child’s coat on backwards after buckling in. Test For Tightness Grab the sides of the seat where the vehicle seat belt is and slide the car seat side-to-side and front-to-back.
If you love these reviews and want me to do it for other seats, let me know. Do share your thought in the comment section below. Once that’s done, you need to do the correct install. Here’s a rule of thumb after you have tightened the seat. Make sure that it wiggles less than an inch.
This Graco Extend2Fit review takes a detailed look at one of Graco’s most popular models. In our roundup of thebest convertible car seats, we listed the Extend2Fit as one of our favorites. Here, we’ll offer a closer look at the features of the seat and how it performed in testing. The Graco 4Ever Extend2Fit 4-in-1 car seat can be installed via Graco’s InRight LATCH system or the seat belt.
It also has a rubberized harness for easy cleaning. Snuglock is another style of installation technology. The system allows you to install your seat in one minute using either the LATCH system or your graco duo glider vehicle’s seat belt. The anti-rebound bar provides an extra layer of safety. On top of the standard safety features, this addition limits the rotation of your seat and child in the event of a crash.
Page 93Head Support Cover Undo elastic loop underneath head support cover. Undo the elastic loops on the sides of the headrest. Tighten Top Tether Strap Remove all the slack. Make Sure Base is a minimum 80% on Vehicle Seat. For easier installation, extend the LATCH strap to its maximum length by pressing the grey button and pulling on the strap.
Another benefit of the Extend2Fit is that it is rated for children up to 50.0 pounds in the rear-facing position. Many car seats cannot accommodate larger children in this position, though it is generally safer for children four and under to be placed this way. The Extend2Fit has an extendable footboard that can keep your child comfortable in the rear-facing mode as they grow. I’m a big advocate for car seat safety and that means we rear-face our car seats for as long as possible.
It’s not nearly as easy to install as the Britax ClickTight system. Yes, just when we thought we had it all worked out, we discovered the 4Ever DLX Extend2Fit model. The only thing we can really complain about is that with a ten-year expiry from the date of manufacture, it’s possible the seat could expire before your child outgrows it. Suitable for babies and children from 4 to 120 pounds. Graco then adds a descriptor such as “Premier” or “Platinum” to indicate additional features.
Because I’m a weirdo with a vehicle seat in my bedroom, I tested out a couple of install options to give you an idea of how much front-to-back space the Extend2Fit takes. When the Extend2Fit was first released in Canada, it had very specific requirements for the foot panel, which may still be present in the owner’s manual if you purchase one today. The Extend2Fit can accommodate a child up to 50 lb or up to 49” (124.5 cm) tall in rear-facing mode. 6-Position ReclineThe Extend2Fit’s 6-position recline allows you to find the most comfortable angle for your child.