I received the Sagma Lite version of their saddle without suspension, which was pretty comfortable. It was more padded than anything I’ve ridden for a long time and quite a bit shorter, as I’ve been riding mostly road-derived saddles forever, and I expect the Sagma Lite to be a little more enduro-focused. Obviously, the oversized 35-mm clamp diameter adds significant stiffness more efficiently than it adds strength, but it’s also designed internally to be super strong, which adds further stiffness. I’m not sure how it’s possible to feel the stiffness of a set of handlebars with 160 mm of suspension travel and a big squishy Schwalbe Wicked Will up front, but somehow, it is. On most bikes, the sensation would be unpleasant, but with all that movement going on below, eating anything the trail has to throw at you, the steel-beam-like stiffness feels quite confidence-inspiring and keeps the steering feeling agile and reactive.
Great for any environment and almost any backcountry activity, the only difference from the Southwest and Junction is three mesh exterior pockets. Mesh exterior pockets provide content visibility, ventilation, quick-drying wet or damp gear, and are 100% field repairable with something as simple as dental floss. Great for any environment and almost any backcountry activity, the Junction is a mashup of the Southwest and Windrider with two side solid pockets to eliminate snag risk and one center mesh pocket for content visibility, ventilation, and quick-drying hyper mountain bike damp gear. Great for any environment and almost any backcountry activity, the only difference from the Windrider and Junction is three solid fabric exterior pockets. Solid pockets are snag-free, protect stowed gear and supplies from dirt, dust, and snow, and provide full privacy when resupplying in town. It’s unfathomable, to me at least, that anyone would need improved performance or reliability than the Magura MT5 brakes offer, however mine came with the Oak Components lever upgrade, which costs more or less the same as the brakes themselves.
Bikeyoke is relatively obscure outside of Germany but I hope that changes, as everything they specced on the bike looked great and was a joy to use. I’ve always been a fan of Dresden-based Acto5 and their absurd CNC-machined frames. Conceptually wild and, in the flesh, a sight to behold. I will never need the performance that they offer, so thankfully, they make cranks for fanbois.
As a result, the mis-mitered tubes could be used to build a fun bike to be given to friends, and after some happy accident, I ended up with one—a steel, single-pivot, long-travel trail bike or, perhaps, a slightly sketchy enduro bike. While I’m not going to pretend to have ridden enough trail bikes or enduro bikes to be able to make nuanced observations about suspension kinematics, I have ridden enough bikes over the past two decades to have a good idea about what worked for me and how the bike felt to ride. It’s a bold move to build a deliciously dynamic and forgivingly flexy steel trail bike in Germany, the heartland of stiffness being touted as the grail of bicycle manufacture in cycling media. I stripped the bike down to the carbon frame (2 pounds 13 ounces) and rebuilt it from the ground up.
Remember, we’re all ambassadors for cycling, so be polite on the road and the trails and observe the leave no trace principles. The bike started life with Berghaus flat pedals, because I felt like that was what I should run. However, a couple of months in I gave up on learning to hop things properly and switched to Hope XC pedals, hoping that they’d help me get some air. In fact, they didn’t as the sensation of jumping through the suspension was completely new, and my poor technique bunny hopping did not translate to a bike with suspension. Regardless, I did continue to run the Hope pedals because I felt more secure clipped in, which inspired greater confidence which in turn improved my riding, even if it was for the wrong reasons.
Even if I did, it changed how I ride gravel for the better. It took a while to get used to the idea that sometimes, where traction ends, the fun begins, rather than my old road cycling mindset, where traction ends is the beginning of the road to A&E. The geometry was designed around being versatile and fun, with long travel but less ultra-long and ultra-stable hyper bicycles than an enduro bike. After a few trips out to various trail-heavy bits of woods, I just started riding it as much as possible on anything to get a feel for it and the way it moves, and in a way, it became exciting for all the right reasons. On the SRD, I could pretty much ride anything that exists locally, which I hadn’t experienced before.
The Hyper eRide mountain bike has been hailed as the perfect companion for younger cyclists looking to get out and explore. At an affordable price, it’s equipped with a powerful electric pedal-assist motor and a 26-inch mountain bike frame. This cutting-edge equipment provides a great way for riders to travel faster, farther, and more comfortably than ever before. The real stars of the show were the grips, which were super comfortable, amazingly durable, had integrated bar ends, and were designed to be rotated with wear, which is unusual for lock-on grips.
My children love it and they are very happyand amazed. I recommend King Toys and I myself will reach out to King Toys for future purchases. The stiffer lever feels a lot snappier and makes the brakes feel much more direct and powerful, whereas the original lever has greater modulation and feels a little more progressive. The Oak lever adds a twizzly knob for adjustment normally reserved for the MT7, so if that’s important to you then the Oak lever upgrade might offer an alternative to a fancier brake set. The stem looked incredible in the unique raw forged finish. It weighs just 86 g and is tested to exceed standards for an enduro bike.