Lower-priced drills usually have a single speed range that tops out at approximately 600 to 800 rpm, compromising both driving and drilling performance. Some of Makita’s other cordless drills also have advertised max torque values that are higher than their max fastening torque specs, but with far smaller differences. The XPH14Z has makita angle grinder a more compact and ergonomic design, 14% shorter than the previous model. It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. With a 2-speed transmission (0-550 & 0-2,100 RPM), the XPH14Z can tackle a wide range of drilling, fastening, and hammer drilling applications.
(with battery, sold separately) it’s a drilling and driving solution with superior comfort and handling. Between Makita’s latest and previous 18V brushless hammer drills, the difference between their max fastening torques of ~646 in-lbs (73 Nm) and ~478 in-lbs (54 Nm) is around 35%. The difference between their “max torque” values of 970 in-lbs (110 Nm) and 530 in-lbs (60 Nm) is around 83%. Picking up the hammer drill for the first time, I considered the weight.
It punched through the stacked boards — even in high gear — and never really caught or struggled to break through as it completed each hole. An 18V Lithium-Ion cordless drill manufactured in 2018 by Makita. If you only want to buy this product only as screwdriver I think you can better look for another version without the hammering function. The Makita XPH07T competed in our epic 50+ drill shootout where it performed well. It managed its speed well, had the second-highest torque, and the smallest overall footprint.
There’s a small unexpected discrepancy here, where the advertised max torque is 11.1% higher than the drill’s max tightening torque. We alternated between driving in 16, 3-inch wood screws through to full depth in stacked 2×12 boards and drilling 3, 1-inch holes using a spade bit for our side-by-side usage comparison. We started each drill in high gear, shifting down to the lower gear if the drill was struggling with either task.
Most of the fast chargers have a built-in temperature sensor that delays the charging cycle, when the battery is too hot from recent heavy use, to when the battery has cooled. Most drill batteries can be recharged in 30 to 60 minutes with the worst taking 6 hours. This is the “previous model” drill that Makita compares the new one to, with their “up to 70% more power” claims. Currently we offer FREE FedEx/UPS small package Ground shipping and FREE ABF/YRC freight ground shipping on most orders of $199 or more within the 48 contiguous states. Most orders under $199 will receive $6.49 flat rate shipping. Some irregular shaped or oversized items may include a special handling charge.
When you already have some 18v makita batteries this products is a very good choice. I already own some Makita drills and screwdrivers but I can’t tell you the real difference in terms of power. While it’s not the highest torque drill on the market anymore, the Makita XPH07T kit really stands out for the smoothness of the drilling and boring applications. Like we found in their compact miter saw, it’s a characteristic that is beginning to define our Makita experience.
Pro Tool Reviews is a successful online publication that has been providing tool reviews and industry news since 2008. In today’s world of Internet news and online content, we found that more and more professionals researched a large majority of their major power tool purchases online. Moving on to the 1-1/2″ spade bit, I dropped into the low-speed mode.
I haven’t opened the drill to compare the internals of the two. Having a well-balanced tool reduces fatigue and the risk of harm during extended periods of use on the job site. Makita’s handle has a great textured rubber over-mold that provides comfort while operating. Makita has been producing high-quality professional tools for more than a century.
Screwing was also not a real problem but after a few screws my arm was a little bit tired due to the weight. The Makita XPH14 has a 2-speed clutch with speeds ranging from RPM on speed one to 0-2,100 RPM on speed two. With 0-3,500 BPM [blows per minute], the hammer drill packs a powerful punch. The new XPH14 is also 1-1/8″ shorter than the earlier models, making it more compact. It bears mentioning that the Makita XPH07T is only rated for a 3″ hole saw. We knew we were going outside the recommended range, and I’ve certainly factored that into my opinion.