They’re generally designed for occasional use while camping. One thing I also like about this screen house is the wheeled carrying bag (which helps relieve the high weight). One of the aspects that helps this screen house stand up so well is the six-sided shape. With that many sides, there are lots of anchor points and guylines to attach to the ground. The roof material also has a 50 UPF sun protection rating, making it a good respite from the hot sun as well. The Eureka Northern Breeze Aluminum Frame Screen House is the best screen house for rain for a few reasons.
Most folks using a screen house while camping aren’t going to be trekking into the wilderness. You have a combination of steel used for its 6+2 legs, and fiberglass used for the 4 roof poles. The elbow elements which connect the roof poles and the legs are pre-attached to the tent so you cannot lose them, see one in the picture below. However, the setup time of this huge tent is some 20 minutes or so. It is much easier to set it up with a partner, this holds in particular for the fly because of the height of the tent.
The outer material is UV sun-protected, and there are large mesh windows for ventilation. It’s easy to set up with one person in under 10 minutes and comes with a floor. The center height is very tall at seven and a half feet and features a straight ozark trail screen house wall design making it plenty big enough to fit over a picnic table. The one thing I’ll note is that this tent doesn’t hold up as well for continuous use, but frankly, none of these screen tents are designed to be permanent fixtures in your yard.
The item may be missing the original packaging or protective wrapping, or might be in the original packaging but not sealed. Throw the screen cloth onto the roof of the skeleton and connect each corner to the bottom of each pole with the connected hook. Place end joints firmly onto the two other longest poles that will be the sides of the your ozark trail sleeping bag Screenhouse. Put one “L” joint and one “R” joint on each pole, then orient them to accept poles from the center pole’s direction. Place the two joint sections marked “T” on either side of the pole that will be your center, most-elevated pole. Make three poles made of three pole sections marked “2B” and a final pole section marked “2”.
Read our guides on how to waterproof a tent and the best tent waterproofing spray. I’ve turned in early more than a few times because the bugs wouldn’t stay away, even with the strongest bug spray. I love tents and writing about them is my great pleasure. If you have received a Faulty item we will provide a replacement part or whole item if necessary.In case of damaged goods please get in touch with us by phone to arrange a course of action.